View CM1693-06DE_4795656.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Praetorian(R) L-C LCD and Camera EMI Array with ESD Protection CM1693-06DE
Features
*
Functional Description
The CM1693-06DE is a pi-style EMI filter array with ESD protection that integrates six filters (C-L-C) into a smallform factor, uDFN 0.40mm pitch package. Each EMI filter channel is implemented as a 3-pole L-C filter, where the component values are 10pF-26nH-12pF. The CM169306DE's roll-off frequency at -6dB attenuation is 300MHz and can be used in applications where the data rates are as high as 140Mbps. The CM1693-06DE also provides greater than -30dB attenuation over the 800MHz to 6GHz frequency range. The device includes ESD diodes on every pin which provides a very high level of protection for sensitive electronic components against possible electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of 18kV, which is beyond the maximum requirement of the IEC61000-4-2 international standard. This device is particularly well suited for wireless handsets, mobile LCD modules and PDAs because of its small package format and easy-to-use pin assignments. In particular, the CM1693-06DE is ideal for EMI filtering and protecting data and control lines for the LCD display and camera interface in mobile handsetsl.
Six channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-inductorcapacitor (C-L-C) network 18kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) Greater than -35dB attenuation (typical) at 1GHz uDFN lead-free package with 0.40mm lead pitch: * 6-ch. = 12-lead uDFN uDFN lead-free package with 0.40mm lead pitch: * 12-lead: 2.50mm x 1.35mm Increased robustness against vertical impacts during manufacturing process RoHS-compliant, lead-free finishing
*
*
* * * *
*
Applications
* *
LCD and camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs, etc. EMI filtering for data ports in cell phones, PDAs or notebook computer Wireless handsets Handheld PCs/PDAs LCD and camera modules
*
* * *
Block Diagram
26n H FIL TER+ESDn* 10pF 12pF FILTER+ESD n*
GND
(c)2010 SCILLC. All rights reserved. March 2010 - Rev. 2
Publication Order Number: CM1693-06DE/D
CM1693-06DE
Pin Configurations
TOP VIEW
(Pins Down View)
BOTTOM VIEW
(Pins Up View)
12
11 10
9
8
7
1
2
3
4
5
6
P936(x)
GND PAD
1
Pin 1 Marking
2
3
4
5
6
12 11
10
9
8
7
CM1693- 06DE 12-Lead uDFN Package
Note: These drawings are not to scale.
Pin Descriptions
DEVICE PIN(s) 1 2 3 4 5 6 GND PAD NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 GND DESCRIPTON Filter + ESD Channel 1 Filter + ESD Channel 2 Filter + ESD Channel 3 Filter + ESD Channel 4 Filter + ESD Channel 5 Filter + ESD Channel 6 Device Ground DEVICE PIN(s) 12 11 10 9 8 7 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 DESCRIPTON Filter + ESD Channel 1 Filter + ESD Channel 2 Filter + ESD Channel 3 Filter + ESD Channel 4 Filter + ESD Channel 5 Filter + ESD Channel 6
Ordering Information
Pins
12
Package
uDFN-12
Ordering Part Number1
CM1693-06DE
Part Marking
P936(x)
2
Note 1: Parts are shipped in Tape and Reel form unless otherwise specified. Note 2: (x) = date code
Rev.2 | Page 2 of 6 | www.onsemi.com
CM1693-06DE
Absolute Maximum Ratings
PARAMETER Storage Temperature Range DC current per Inductor DC Package Power Rating RATING -65 to +150 30 500 UNITS C mA mW
Standard Operating Conditions
PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C
Electrical Operating Characteristics (see Note 1)
SYMBOL
L CTOTAL VDIODE ILEAK
PARAMETER
Channel Inductance Total Channel Capacitance Standoff Voltage Diode Leakage Current (reverse bias)
CONDITIONS
MIN
TYP
26
MAX
UNITS nH
At 2.5VDC Reverse Bias, 1MHz, 30mVAC IDIODE =10A VDIODE =+3.3V
17.6 5.5
22
26.4
pF
V
0.1
1.0
A
VSIG
Signal Clamp Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage Contact Discharge per IEC 61000-4-2 Level 4 Dynamic Resistance Positive Negative Roll-off Frequency at -6dB Attenuation ZSOURCE=50, ZLOAD=50
ILOAD = 10mA ILOAD = -10mA Notes 2 and 3
5.6 -1.5 18
6.8 -0.8
9.0 -0.4
V V kV
VESD
RDYN
2.3 0.9

fR
300
MHz
Note 1: TA=25C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then clamping voltage is measured at pin C1). Unused pins are left open.
Rev. 2 | Page 3 of 6 | www.onsemi.com
CM1693-06DE
Performance Information
Typical Filter Performance (TA=25C, DC Bias=0V, 50 Ohm Environment)
Figure 1. Typical Insertion Loss Typical Diode Capacitance vs. Input Voltage
Figure 2. Filter Capacitance vs. Input Voltage (normalized to capacitance at 0VDC and 25C)
Rev.2 | Page 4 of 6 | www.onsemi.com
CM1693-06DE
Package Dimensions
The 12-lead, 0.4mm pitch uDFN package dimensions are presented below. Package JEDEC No. Leads Millimeters Dim. Min A A1 A3 b D D2 E E2 e K L # per tape and reel 0.15 0.15 2.40 1.90 1.25 0.30 0.45 0.00 Nom 0.50 0.02 0.127 REF 0.20 2.50 2.00 1.35 0.40 0.40 BSC 0.22 REF 0.30 0.35 0.25 2.60 2.10 1.45 0.50 Max 0.55 0.05 Min 0.018 0.000 Nom 0.020 0.001 Max 0.022 0.002 TDFN MO-229C*
12 Inches
0.005 REF 0.006 0.094 0.075 0.049 0.012 0.008 0.098 0.079 0.053 0.016 0.010 0.102 0.083 0.057 0.020
0.016 BSC 0.009 REF 0.006 0.010 0.014
3000 pieces
Controlling dimension: millimeters *This package is compliant with JEDEC standard MO229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Dimensions for 12-Lead, 0.4mm pitch uDFN package
Rev. 2 | Page 5 of 6 | www.onsemi.com
CM1693-06DE
Tape and Reel Specifications
PART NUMBER CM1693-06DE PACKAGE SIZE (mm) 2.50 X 1.35 X 0.50 POCKET SIZE (mm) B0 X A0 X K0 2.75 X 1.60 X 0.60 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 P0 4mm P1 4mm
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
Rev.2 | Page 6 of 6 | www.onsemi.com

▲Up To Search▲

Price & Availability of CM1693-06DE

	To Download CM1693-06DE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .